Assembly; Supplied; Workplace; Transport / Unloading The Machine - Holzmann FKS 305VF-2600 Bedienungsanleitung

14

ASSEMBLY

14.1 preparatory activities
14.1.1

Supplied

After receipt of the delivery, if all parts are in order. Report any damage or missing items imme-
diately to your dealer or the shipping company. Visible damage must also be recorded without
delay in accordance with the provisions of the warranty on the delivery, otherwise the goods shall
be accepted as properly.
14.1.2

Workplace

Choose a suitable place for the machine. Observe the safety requirements of Chapter 2 and the
dimensions of the machine from Chapter 1.
The selected location must ensure as well as the possibility for connection to an extraction system
a suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on
all bases simultaneously.
You must also secure around a distance of at least 0.8 m around the machine. Before and behind
the machine must be provided the necessary distance for the supply of long workpieces.
14.1.3

Transport / unloading the machine

You need a forklift or pallet truck with the necessary bearing capacity.
The forks of the forklift or pallet truck are made to the machine.
 Leveling with the four leveling the machine in a horizontal stable position.
The forks of the forklift must be at least 1200 mm long.
Check to see if the eyes are well attached to the body of the machine.
The lifting and transportation of the machine must be performed by qualified
personnel with the appropriate equipment.
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
W A R N I N G
Formatkreissäge / panel saw FKS 305VF-2600 / 3200
ASSEMBLY
Seite 30