Attaching/Removing The Telescopic Tube - Beko VCM 71602 AD Bedienungsanleitung

3 Usage
3.1 Intended use
The appliance was designed for household use
and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (17) push the hose cap in
the direction of arrow until it is aligned with the
housing.
• The tabs on the hose cap (7) must be seated
correctly.
2. To remove the hose (17), press on the tabs on
the hose cap (7) and pull it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (14) to the handle
(16).
2. Pull the telescopic tube (14) from the handle
(16) to remove it.
Vacuum Cleaner / User Manual
3. You can extend or shorten the telescopic tube
(14) by sliding the telescopic tube adjustment
latch back and forth.
3.4 Attaching/removing the
parquet/carpet brush
1. Attach the telescopic tube (14) to the parquet/
carpet brush (9).
2. Pull the telescopic tube (14) from the parquet/
carpet brush (9) to remove it.
3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch located on the parquet/carpet brush (9);
• Use " " position for hard floors and parquet.
• Use " " position for rugs and carpets.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark the red mark comes.
Do not pull any more after reaching
the red mark.
7 / EN