Attaching/Removing The Hose; Attaching/Removing The Telescopic Tube; Operation - Beko VCC34802AB Anleitung

3 Usage
3.1 Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. Insert the hose in the coupling on the appliance
and press as far as it will go.
2. To remove the hose press the buttons on the
sides of the hose.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (4) to the handle (1).
2. Pull the telescopic tube (4) from the handle (1)
to remove it.
3. Push the telescopic adjustment latch (5) in the
arrow direction and pull the telescopic tube (4)
to adjust its length.
3.4 Attaching/removing the
parquet/carpet brush
You can install/remove the narrow end of the
telescopic tube (4) from/to the parquet/carpet
brush (7).
8 / EN
3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch located on the parquet/carpet brush (7);
• Use " " position for hard floors and parquet.
• Use " " position for rugs and carpets.

3.6 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
2. Press the on/off button (15) to switch on your
appliance.
Vacuum Cleaner / User Manual