Operation; Intended Use; Attaching/Removing The Hose; Attaching/Removing The Telescopic Tube - Beko BKS 5422D Handbuch

3

Operation

3.1 Intended use

The appliance was designed to be used in houses,
and is not fit for industrial use.

3.2 Attaching/removing the

hose
1. To attach the hose (1) pull the hose cap (9) in
the direction of arrow until it is aligned with the
housing.
• The tabs on the hose cap (9) must be seated
correctly.
2. To remove the hose (1) press on the tabs on the
hose cap (9) and pull it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (14) to the handle
(18).
2. Pull the telescopic tube (14) from the handle
(18) to remove it.
3. Push the telescopic tube adjustment latch (15)
and pull the telescopic tube (14) to adjust its
length.
Vacuum cleaner / User manual
3.4 Attaching/removing the

parquet/carpet brush

1. Attach the parquet/carpet brush (12) to the
telescopic tube (14) in the direction of the
arrow.
2. You can remove the telescopic tube (14) from
the parquet/carpet brush (12) by pulling it.
3.5 Adjusting the parquet/
carpet brush
By pressing the adjustment latch (13) located on
the parquet/carpet brush (12);
• To vacuum on firm ground and parquet, extend
the brush before vacuuming.
• vacuum on carpets and rugs, retract the brush
before vacuuming.
3.6 Operation
1. Plug the appliance after pulling the power plug
located at the back of the appliance.
WARNING: Stop pulling the
appliancecable when it comes to the
A
yellow mark located on it. After the
yellow mark the red mark comes. Do
not pull any more after reaching the
red mark.
2. Press on/off button (6) to switch on your
appliance.
7 / 60 EN