Klarstein Hot Spot Crystal Flow Bedienungsanleitung Seite 34

EN
Note: each step must be operated within 2 min, or it will exist setting and screen will
recover to initial display.
Anti-frost: appliance keep room temperature at default 5 °C to prevent frost.
Comfort: comfortable level achieved by setting power and temperature upon need.
(Reference to step 2&3)
Body Sensor
Once PI-P2-P3-P4-UP mode is set, body detector will be activated at the same time. The
icon will light up.
When the pre-set timing of week timer comes, appliance will start heating. At the first
15 minutes, if no absence is detected in the room, appliance will stop heating and stay
at standby mode. Once body sensor finds any come-in person, the appliance will start
heating again.
Note: Body detector only take effects on comfort mode. No function in anti-frost mode.
24 Hour Timer – Auto Off
In P1 mode, touch twice quickly to activate 24 hour timer setting, icons &
flash. Touch + or - to set timer among 0 to 24. Leave the setting for 5s, stops
flashing, stops flashing and will keep lighting up, timer setting is confirmed. Screen
will show ambient temperature and counting-down hour in turn.
Touch again could cancel the setting. Screen will turn to show room temperature.
Child Lock Function
In standby mode, long touch + and - at the same time for 3 seconds to activate child
lock function, screen will show '.[ . . ].' after setting and will recover to initial display in 5
seconds. Other function is invalid once child lock function works. Once button is touch,
screen will flash '.[ . . ].' to remind you child lock function is working and recover to initial
display in 5 seconds.
Long touch + and - at the same time for 3 seconds again could cancel child lock
function.
Window Open Detection Function
In any working mode (in spite of anti-frost), long touch for 3 seconds to activate
window open detection icon flashes on the screen.
Long touch for 3 seconds again could cancel the setting, the window open detection
icon disappears.
In window open detection mode, room temperature is found to drop 5°C in 10 minutes
when appliance is heating. Appliance will consider the window may be open and start
detection. In the next 30 minutes, if room temperature is found to be the same or lower
34