Klarstein Hot Spot Crystal Flow Bedienungsanleitung Seite 33

Week day mode
1-7 P1
1-5
P2
6-7
1-5
P3
6-7
1-7 P4
1-7 P5
UP mode is week timer setting of comfort / anti-frost set by end-user.
Once UP mode setting is activated, figure 1 (Monday) of '1 2 3 4 5 6 7' and
begin flashing. lights up.
Example 1 - set one or three (at most) time-range at comfortable level, then follow steps
as below,
Touch + or -. The LED displays 1 (1st working-hour) &
Touch + or - to select the start time of 1st working-hour among 0-23. Once selected,
touch to confirm it. Touch + to set end time. Then touch
Note: The end time must be at least 1 hour more than start time.
The LED turns to display 2 (2nd working-hour), repeat the same steps of 1st working
hour to set 2 more time-range at most upon your need.
After one day setting is finished, figure 2 (Tuesday) of '1 2 3 4 5 6 7' begin flashing,
repeat the same steps above to set working hour of each day among .
Example 2 - Touch directly instead of + or -, to leave that day at anti-frost function,
Anti-frost Comfort
00:00-
24:00
00:00- 06:30-
06:30 08:30
00:00- 07:30-
07:30 10:00
00:00- 06:00-
06:00 17:00
00:00-
24:00
00:00- 06:00-
06:00 22:00
00:00-
24:00
Working mode
Anti-frost Comfort
08:30- 17:00-
17:00 22:30
10:00- 12:00-
12:00 14:00
17:00-
24:00
22:00-
24:00
flashes.
to confirm 1st setting.
Anti-frost Comfort
22:30-
24:00
14:00- 17:00-
17:00 22:30
EN
Anti-frost
22:30-
24:00
33