Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Option
Explanation
Baud Rate:
Transmission speed between the machine and the printer
Paper size:
The printer can be adapted to the paper width
Font:
Set up the font size in inches
Blank of tail:
Empty lines that will be left at the end of the receipt
Print number:
Amount of receipts that will be printed each time
1. Printer Settings
Paper cutting:
Automatic paper cutting (depending on the printer)
Print ID:
Printing of the User ID on the receipt
Select ID:
Setting a User ID: move through characters from right to left with LEVEL/CF and
change the character with SET and ADD.
Auto Print:
Automatic printing when the banknotes are removed from stacker
2. LCD Language
Not selectable
In SP Mode, when a differing banknote is found:
3. SP Select
Continue: The machine maintains the original reference denomination.
Refresh: The machine uses the new banknote as reference from then on.
4. Warning Buzz
If activated, the machine beeps when an error is encountered or a batch is full.
Locked: During Euro or GBP mode the CF key is disabled, so the counterfeit
detection cannot be modified or deactivated.
5. CF Lock
Unlocked: Allows selection of desired counterfeit tests.
6. Comma
If enabled, a comma is placed after the thousands digit.
If activated, when an error occurs the stacker stops before the banknote is
7. Stacker brake
ejected.
If deactivated, the START/RESET key has to be pressed to start the counting
8. Auto start
procedure.
9. Power Save
The display will turn off after the specified time in minutes.
If this option is activated, when in value counting mode the user can manually
increase or decrease the amounts of each denomination. By pressing and
holding the SAVE/PRINT key the user enters the Counting Info menu. The user
can navigate between the denominations with the BATCH and MODE keys and
10. Manual Add
increase or decrease the amount of each denomination with the ADD and SET
keys. START/RESET closes the menu.
Note: Use this option when you have dirty or severly damaged
banknotes, which the machine does not seem to be able to count.
11. Default Load
Resets the machine to the original factory configuration.
12. Batch function
Further options for the Batch counting mode are disabled.
Available only when in GBP mode.
13. Old GBP
Reject: Old version of £20 banknote is rejected.
Currency
Count: All versions are counted.
Available possibilities
2400 bps to
115200 bps
2 INCH, 3 INCH
9 x 13, 12 x 24
3 to 9 lines, 5 lines
1 to 3 pieces
Yes, No
Yes, No
Yes, No
English
Cotinue, Refresh
Off , On
Lock, Unlock
Enable, Disable
On, Off
On, Off
1 to 60 min, 20 min
On, Off
Reject, Count
Werbung
