Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CF
UV
MG
IR
UV+MG
UV+IR
MG+IR
--
For security purposes, the modification of the counterfeit detection is by default locked.
Addition function:
With the Addition function you can sum several counting procedures into one single value. Press and hold
the ADD key until the Add menu opens. Navigate with MODE and BATCH between the three options and
select one with SET.
1. Normal:
In the Normal mode the addition is deactivated. With each new counting procedure the result sets back
to zero. The counting result can also be cleared with the START/RESET key.
2. Add:
With the Add mode you can add more than one counting results into a total sum. In the display appears
the message "Add Total". During a counting procedure the display shows the message "Current", the
value and amount of the counted banknotes. After removing the banknotes from the stacker the value
and amount of banknotes will be added to the total sum.
Pressing ADD you can choose between the following options:
[Current]: the following counting procedures will be added to the total sum.
[Verify]: the following counting procedures will not be added to the total sum.
Note: the option Verify can also apply to a stack of banknotes which has already been
counted, but that still remains in the stacker. Thus you can avoid the addition of mistakenly
counted banknotes to the total sum. Afterwards you can easily go back to Current counting
and adding banknotes to the total sum.
Detection of UV, IR and Magnetic features
Detection of UV features
Detection of MG features
Detection of IR features
Detection of UV and MG features
Detection of UV and MG features
Detection of MG and IR features
No counterfeit detection
Werbung
