Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Back / Control panel and Display
3
1. Display
2. Keys 0-9: Introduction of the Batch value.
3. C (Clear): Pressing: sets the batch amount back to zero.
Pressing and holding: Selection of predefined parameters (see Piece Counting mode)
4. LEVEL/CF: Activation and adjusting of counterfeit tests in Piece Counting mode. Activation and
adjusting of counterfeit tests in Value Counting mode. Alternatively: cursor towards left.
5. CURR: Selection between Piece and Value Counting modes of the desired currency.
Alternatively: cursor towards right.
6. ADD: Selection between the different Addition modes (see Add on page 11)
7. BATCH: Adjusting of the batch amount with a predefined value. Alternatively: cursor upwards.
8. SET: Confirm selection in the control menu, adjusting of counting speed in Piece Counting mode,
selection of the desired banknote sort in manual Mode (see E and GBP mode).
9. MODE: Selection between the different counting modes. Alternatively: cursor downwards.
10. SAVE/PRINT: Display and printing of the counting result.
11. START/RESET: Exiting of menus. Selection of the different Addition options.
5
2
6
4
1
2
3
1. Power switch
2. Port for the receipt printer
3. Feeder adjusting screw
4. Power supply
5. Port for optional external display
6. USB port (exclusively for servicing purposes)
1
4
5
7
6
9
8
10
11
Werbung
