Automatic Time Limit; Basic Settings; Changing The Basic Settings - Bosch PKF375N14E Gebrauchsanleitung

Automatic time limit

If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your own personal needs.
Indicator Function
™ƒ Audible signal
Confirmation signal and operation error signal are switched off.
‹
Only the operation error signal is switched on.
‚
Confirmation signal and operation error signal are switched on.*
ƒ
Automatic timer
™†
Switched off.*
‹
‚ - ŠŠ Cooking time, after which the hotplates switch off
Duration of the timer end signal
™‡
‚ 10 seconds.
30 seconds
ƒ n
1 minute.*
„
Activation of the filament circuits
™ˆ
‹ Switched off.
Switched on.
‚
Last setting before the hotplate was switched off.*
ƒ
™Š Time for selecting the hotplate
Unlimited: The last selected hotplate can always be adjusted without having to make a new selection.*
‹
Once you select a hotplate, you have 5 seconds to adjust it, after which you will have to select it again in order to
‚
be able to adjust it.
Reset to basic setting
™‹
‹ Switched off.
Switched on.
‚
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the
2.
4 seconds.
Touch the symbol repeatedly until the desired indicator
r
3.
appears on the display.
Set the desired value on the settings range.
4.
and the / residual heat
" ‰ • œ
symbol for
r
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Touch the symbol for 4 seconds.
r
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
15