Inhaltsverzeichnis
Werbung
Automatic time limiter
Switching off input confirmation
If a hotplate is in constant use for a long time without
the setting being changed, the automatic time limiter
will be activated.
The hotplate heating is interrupted.
An F and an 8 flash alternately in the hotplate
indicator.
The indicator goes out when you touch any control
panel. Now you can reset the hotplate.
The time at which the time restriction is activated
depends on the heat setting (1 to 10 hours).
A short buzz confirms that a button has been
touched. This buzzer can be turned off:
Switch on the hob using the main switch.
1.
Set all hotplates to heat setting 3.
2.
Switch off all the hotplates one by one from right to
left.
3.
Touch the main switch for at least 5 seconds, after
which a confirmation signal sounds.
You may also switch the input confirmation on again.
Proceed in the same manner as for switching off.
53
Werbung
Kapitel
Inhaltsverzeichnis
