Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2
Manual operation (without remote
control)
If the remote control does not work, the unit can be
operated manually with the manual control button
located on the indoor unit. Note that manual operation is
only a temporary solution, and it is highly recommended
to run the unit with the remote control.
1
1 LED display (shows the temperature set or the error
codes if an alarm is triggered)
2 Manual button
3 Operation indicator
4 Timer light
5 Infrared receiver
6 PRE-DEF indicator (preheating/defrosting)
7 Alarm indicator
– MANUAL button: This button is used to select
the operating mode in the following order:
AUTO, FORCED COOL, OFF.
– Forced Cooling Mode: In FORCED COOL mode,
the operation light flashes. The system operates
with the fan at high speed for 30 minutes, then
switches to AUTO mode. During this operating
cycle, the remote control is disabled.
24
2
3
4
5
6
7
Fig. 33
3.3
Other functions
– Automatic restart
If the power supply to the unit is interrupted, the
unit will automatically restart with the last settings
when it is restored.
– Memory of the ventilation slits angle
When the unit is turned on, the ventilation slits
automatically return to the last set angle.
– Detection of refrigerant leaks
The indoor unit automatically displays "EC" when it
detects a refrigerant leak.
l
WARNING
For a detailed explanation of the unit's
advanced features (such as TURBO mode and
self-cleaning functions), refer to the Remote
Control Manual.
Use
Werbung
Inhaltsverzeichnis
