Disposal; Accessories | Spare Parts - Weh TW54 Betriebsanleitung

12. DISPOSAL

Î Dispose of the WEH
national and local regulations on disposal applicable at the time of disposal.

13. ACCESSORIES | SPARE PARTS

Adaptors
Various adaptors are available to connect the 'B1' media inlet of the WEH
filling hose.
Actuation
Various actuation units such as bails, wire ropes etc. are available in different shapes
and sizes for the WEH
Locking devices
Additional locking devices are also available for the WEH
TD1 swivel joint
A swivel joint is available for the WEH
alignment of the connector when connecting to the cylinder valve thread, thus
simplifying the connection procedure even further. Twisted hoses are prevented.
Quick release coupling TK350-TN350
Quick release coupling for quickly and easily exchanging the WEH
to switch to other standards and to switch from residual pressure to non-residual
pressure connectors. The quick release coupling can also be used as a swivel joint.
Part No�
C1-91242
Spare parts
The following parts are available for maintenance of the WEH
Part No�
On request
Î
When placing your order, please indicate the part no. marked on the WEH
Please note: For the correct use of WEH
Chapter 9. Inspection | Maintenance on page 23.
Product appropriately when you no longer need it. Observe all
®
Product.
®
Product. The swivel joint enables radial
®
Description
TK350-TN350
Position Description
Pos. 7 Front seal
Operating instructions
Product.
®
Port "B1"
M16x1.5
male thread
Spare parts, please refer to
®
MD-10017-L51-R2.1.0-03
Product to the
®
Product for repairs,
®
Port "B2"
M16x1.5
male thread
Product:
®
Product itself.
®
Page 31
AE