Technical Data - Weh TW54 Betriebsanleitung

4. TECHNICAL DATA

Please note: Depending on the application, the technical data of your WEH
may differ from these operating instructions. Please therefore observe the marking on
the WEH Product itself.
®
Characteristics
Pressure range
Temperature range
Connection A
Medium**
Part materials
Sealing materials
Design***
Actuation***
Conformity /
Tests /
Approvals
* Please observe the pressure limits specified in the relevant cylinder valve standard.
These values may be lower than the max. allowable operating pressure of the WEH
** Other gases possible depending on the order confirmation
***depending on the application
Basic version
PN = 200 bar | PS = 250 bar *
PN = 300 bar | PS = 375 bar *
+5 °C to +80 °C
+5 °C to +60 °C (O )
2
Female thread connection based on the relevant country standard
e.g. DIN, CGA, BS, NF etc.
Nitrogen, oxygen, CO
2
Wear-resistant stainless steel, corrosion-resistant surfaces, brass
According to gas type
With or without RPV pin
Manual actuation via bail actuation, locking device etc.
- Adiabatic ignition test completed
Operating instructions
, air, noble gases, mixed gases, medical gases
Product.
®
MD-10017-L51-R2.1.0-03
AE
Product
®
Page 13