Igniting And Controlling The Burners; Hob Burners - NEFF Z 1230 X0 Gebrauchsanweisung

The control knob belonging to a specific burner can be identified from the cooker
description or by the symbols on the control panel.
Lighting the burners is made easy by the integrated electric igniter.

Hob burners:

It is possible to continuously adjust the
flame between high (maximum) and low
(minimum).
,
= high setting (maximum)
= low setting (minimum)
,
Igniting a burner with the integrated
electric igniter:
1. Press the appropriate control knob
inwards and turn it anti-clockwise to the
high setting.
The electric igniter will continue to
generate a spark for as long as the
knob is pressed.
2. After the flame has been ignited, keep
the control knob pressed for about
5 seconds.
3. Before you release the control knob,
press it inwards firmly once more.
4. If the flame does not ignite or it
extinguishes, wait approx. 3 seconds
and repeat the ignition procedure.
5. To switch off the burner, turn the
control knob clockwise to the zero
position.
38

Igniting and controlling the burners

0
Igniting a burner with a match or similar
means:
1. Press the appropriate control knob
inwards, turn it anti-clockwise to the
high setting and light the burner with
the match.
2. After the flame has been ignited, keep
the control knob pressed for about
5 seconds.
3. If the flame extinguishes, wait approx.
3 seconds and repeat the ignition
procedure.
4. To switch off the burner, turn the
control knob clockwise to the zero
position.