Herunterladen Inhalt Inhalt Diese Seite drucken

NEFF Z 1230 X0 Gebrauchsanweisung Seite 55

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 1
What to do ...
... if the oven burner constantly
extinguishes.
... if the oven burner suddenly extin-
guishes.
... if the oven temperature varies sig-
nificantly.
... if the oven cooling fan does not
work.
...if smoke occurs while roasting or
grilling.
... if the oven becomes very dirty as
a result of roasting or grilling.
... if a large amount of condensation
occurs inside the oven.
... if enamelled slide-in parts have
dull, light blotches?
... if the glass pane in the oven door
steams up.
... if after prolonged use, the oven
window panes are soiled from the
inside.
Trouble-shooting Guide
Possible cause
Gas supply set up incorrectly.
Oven door was closed too quickly
(created a draft).
Defective thermostat.
Power failure.
Defective fan.
Oven temperature set too high.
Distance between grill element and
food is too small.
Oven temperature set too high.
Wire shelf or grill pan not inserted
properly.
Normal occurrence, for example with
cakes or pies with very moist fillings
(e.g. fruit) or large joints of meat.
Normal occurrence due to dripping
meat juices.
Normal occurrence. Caused by diffe-
rence in temperature between inside
and outside.
This kind of soiling is normal.
Remedy
Arrange for gas setting to be
checked by dealer or installer.
Close oven door slowly whenever
oven burner is lit.
Arrange for appliance to be serviced.
Check fuses in main fuse box for
house.
Arrange for appliance to be serviced.
Set oven to a lower temperature.
Increase distance between grill ele-
ment and food.
Set oven to a lower temperature.
Place wire shelf over grill pan and
slide both into oven at same level.
Wipe off condensation when you
have finished using oven.
Not possible.
Switch on oven for approx. 5 minu-
tes at 100º C.
Detach the oven door and lay front
side down on a soft, clean base.
Grip the door glass near the hinges,
pull up and remove.
Doors with 3 panels:
Disengage inner door glass at the
corner pieces and lift it up using, for
example, a pair of frying tongs made
of plastic or wood.
Installing the cleaned glass:
Insert the inner door glass and lock
into position.
Attach the door glass and lock into
position by pressing the glass near
the hinges.
55

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis