Igniting And Regulating The Burners - NEFF E 3322 Gebrauchsanweisung

Igniting and regulating the burners

Hotplate burner
Igniting with the electric
spark igniter
Igniting with match or
similar expedient
52
The association of the operating elements knobs
can be seen from the appliance description and
recognized from the symbols on the gas cook
screen.
Igniting the burners is facilitated by an electric spark
igniter.
You can regulate infinitely between the high-power
setting and low setting.
g
= large setting
f
= small setting
1.
Press in the appropriate knob and turn anticlock-
wise to high setting.
The electric spark ignition will operate as long as
the knob is pressed in.
2.
After igniting the flame, keep knob pressed in for
around 5 seconds.
3.
Before releasing, press knob vigorously once
more.
4.
If there is no ignition, or the flame goes out,
repeat ignition procedure after around 3 seconds.
5.
To switch off the burners, turn knob to the right
to the zero setting.
1.
Press in the appropriate knob, turn it anticlock-
wise to high setting and light the burner with a
match.
2.
Keep knob pressed in for around 5 seconds.
3.
If the flame goes out, repeat ignition procedure
after around 3 seconds.
4.
To switch off the burners, turn knob to the right
to the zero setting.