General Safety Instructions - Weh TW800 Betriebsanleitung

AE Operating instructions
1�4

General safety instructions

Î
Always comply with all applicable local, national and international
requirements, stipulations, decrees, laws, standards, provisions, directives, norms,
regulations, prohibitions and instructions as well as all applicable industrial,
quality and technical standards. In particular, make sure that you and all users
comply with the applicable requirements related to occupational health and safety
as well as product safety requirements and that all required permissions, certifi-
cates and approvals have been obtained.
Î
These operating instructions should be provided to anyone responsible for the
installation, operation and maintenance of this WEH
Caution: Incorrect application poses a risk to the useres' health and can cause
property damages. The consequences of incorrect application could include the
following:
- the connector or parts of the connector become loose under pressure
- media that may be under pressure, hot or toxic, can escape
- connection hoses vibrate dangerously
Î
Contact WEH before using the WEH
instructions are unclear in any way.
Î
Take appropriate safety measures if operating conditions exist that could endanger
the user.
Î
In case of any damage that may affect the proper functioning of the WEH
do not use the WEH
the WEH Product may only be performed by WEH.
®
Î
Comply with the assembly data indicated in these operating instructions. Tight-
ening with higher torques/assembly turns can result in damage or even fractures
when the system is pressurized.
Î
Do not use any auxiliary materials or cleaning agents other than those indicated
in these operating instructions. Using other auxiliary materials or cleaning agents
may cause damage to the WEH
- WEH is not responsible for damage caused by external forces or other external
influences.
- It is assumed that only transport and storage facilities suitable for the storage of
the WEH Product are used.
®
Page 8
MD-10085-L51-R2.0.0-03
Product if the instructions in these operating
®
Product until the situation has been clarified. Disassembly of
®
Product or to downstream components.
®
Product.
®
Product,
®