AE
Operating instructions
9�2
Maintenance intervals
Î
Inspect the WEH
ating conditions, but at least every 3 months. After 20,000 cycles or 3 years at the
latest, depending on what happens first, starting from the date of delivery (invoice/
goods issue date by WEH or the distributor), the WEH
WEH for maintenance.
These intervals can also be significantly shorter, which depends especially on your
individual application/use. Therefore, in case of abnormalities – especially during
regular inspection – send the WEH
If the WEH
Product is not regularly inspected and sent to WEH for maintenance,
®
leakage may occur and under certain circumstances this may result in failures
and/or accidents.
- For devices with cold and hot water applications, the sealing disc of the connector
must regularly be lubricated with WEH
part no. E99-40 to prevent dry-running and ensure correct functioning. Indications
of
dry-running could include stiffness when connecting and disconnecting. Depending
on the degree of lubrication, it may be necessary for the operator to set a suitable
maintenance schedule independently.
Page 20
MD-10085-L51-R2.0.0-03
Product at regular intervals depending on the respective oper-
®
®
Product must be sent to
®
Product immediately to WEH for maintenance.
High performance grease paste
®