Connections, Operating And Display Elements - Cameo MULTI FX BAR EZ Bedienungsanleitung

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

12 11
14 13
11
POWER IN
IEC mains socket with built-in fuse holder. Connection via the supplied IEC mains coble.
IMPORTANT: Replace the fuse only with a fuse of the same type and value. In the event of repeated fuse failure, please contact an author-
ised service centre.
12
POWER OUT
IEC power output socket. Facilitates power supply to other CAMEO spotlights (max. current draw 5A).
13
DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console)
14 DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
15
MIC SENSITIVITY
Control dial for setting the microphone sensitivity in standalone sound-control model and in DMX sound-control mode. Turn anti-clockwise
to reduce sensitivity and clockwise to increase sensitivity.
16
LED DISPLAY
The four-digit LED display shows the operating mode and other system information.
17
CONTROL BUTTONS
MODE: Press MODE to go up one level in the menu structure to the main display.
ENTER: Move down one level in the menu structure. Confirms mode selection, programme selection and value changes.
UP and DOWN: Selection of main menu items, programme selection, value changes such as programme speed and DMX address.
18
IR SENSOR
Infrared sensor for control via IR remote control (included).
6
15
16
17
18