Operation; Control Panel; Switching Off; Temperature Indication - AEG SCE81911TS Benutzerinformation

24 www.aeg.com

4. OPERATION

4.1 Control panel

1
ON/OFF switch
1
Freezer temperature regulator
2
Fridge-Freezer temperature indicator
3
button
4.2 Display
A B C
4.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the default
temperature
To set the desired temperature (refer to
"Temperature regulation").
The display might flash in
red and alarm buzzer might
operate after few seconds.
To reset the alarm refer to
"High temperature alarm".

4.4 Switching off

1. Hold the ON/OFF button for 5
second.
The display switches off after a
countdown on the temperature
indicator.
2 3
˚C
D E F
4 5
MODE
Display
4
MODE and Alarm reset switch
5
Fridge temperature regulator
6
A. Fridge compartment indicator
G
B. Freezer compartment indicator
C. Positive or negative temperature
indicator
D. Temperature indicator
E. FROSTMATIC function
F. COOLMATIC function
G. DYNAMICAIR function
2. Disconnect the mains plug from the
power socket.
4.5 Switching off the fridge
compartment
To switch off the refrigerator
compartment, rotate the Fridge
temperature setting regulator to position
"O".
Once the refrigerator compartment is
switched off the light inside will not turn
on.
The freezer compartment keeps
operating and only freezer compartment
temperature is indicated on the display.

4.6 Temperature Indication

Each time the Fridge-Freezer
temperature indication button is
pressed, the display indicates in
sequence:
6