DeWalt dc228 Handbuch Seite 36

E N G L I S H
1 Keyless chuck (DC229/DC234)
1 Battery pack (DC228/DC229/DC232K/DC234K)
2 Battery packs (DC229KL/DC232KL/DC234KL)
1 Charger
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
Note: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
INTENDED USE
Your cordless rotary hammer drill DC228/DC232
has been designed for professional drilling,
hammer drilling and screwdriving applications.
Your cordless rotary hammer drill DC229/DC234
has been designed for professional drilling,
hammer drilling and screwdriving applications as
well as for light chipping.
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty rotary hammer drills are
professional power tools. DO NOT let children
come into contact with the tool. Supervision is
required when inexperienced operators use this
tool.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 Tool holder
6 Locking collar
7 Dust cover
8 Depth adjustment rod
9 Side handle
10 Grip
11 Battery pack
34
Charger
Your DE9000 charger accepts D
battery packs of 36 V (DE9360) and 28 V (DE9280)
at 2.2 Ah.
11 Battery pack
12 Release button
13 Charger
14 Charging indicators (red)
Overload clutch
In case of jamming of a drill bit, the drive to the
drill spindle is interrupted. Because of the resulting
forces, always hold the tool with both hands and
take a fi rm stance.
Brake mechanism
When the variable speed switch is released,
the spindle will stop rotating instantly.
Active vibration control
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the
life of the unit. In operation, a spring loaded
mechanism counterbalances the vibration forces.
This can be sensed by the cushioning effect when
pressure is applied to the tool. Make sure the
spring is engaged but not too fi rmly.
The mechanism should be allowed to 'fl oat'.
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 60335.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D e WALT repair agent or a qualifi ed electrician.
• Disconnect the plug from the supply.
WALT Li-Ion
E