Steinbach Poolrunner Originalbetriebsanleitung Seite 40

A lawnmower can damage a cable placed on the ground.
- Route the cable so that it cannot be damaged by a lawnmower or
similar device.
1. Completely unroll the cable and place it next to the pool without twisting.
2. Hold the device by the handle and
lower it slowly and tilted slightly
forward into the water until all air has
escaped and it sinks to the bottom by
itself. The device should run at a right
angle to the pool wall.
The device is in the pool.
Connecting the control unit
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
High temperatures can damage the control unit.
- Do not cover the control unit.
- Place the control unit in the shade, if possible.
1. Only let as much of the floating cable
all the spots in the pool.
40
NOTICE!
10
WARNING!
Risk of electric shock!
NOTICE!
into the water so that the device can reach
1