Cleaning The Water Tank - IKEA FINSMAKARE 504.117.30 Bedienungsanleitung

ENGLISH
Removing the shelf supports
To clean the oven, remove the shelf
supports.
Caution! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
1
Install the removed accessories in the
opposite sequence.
The retaining pins on the
telescopic runners must point to
the front.
Cleaning
Caution! Before your start the
cleaning, make sure that the
water tank is empty. Refer to
"Daily use" chapter, Emptying the
water tank.
Caution! If there are other
appliances installed in the same
cabinet, do not use them at the
same time as the function:
Cleaning. It can cause damage to
the appliance.
2
The cleaning cannot start:
• if the core temperature sensor is not
removed.
• if the oven door are not closed.
1. Remove all accessories and removable
shelf supports.
2. Clean the oven cavity with warm water
and mild detergent. Clean the inner door
glass with warm water and soft cloth.
3. Turn on the oven.
4. Enter the Menu and select the function:
Cleaning. Press
5. Set the duration of the cleaning:
Option
Quick
Normal
Intense
6. Press .
When the cleaning starts, the oven door is
locked and the lamp does not work.
To stop the cleaning before it is completed,
turn off the oven.
Warning! After the function is
completed, the oven is very hot.
There is a risk of burns.
The door stays locked and some of the oven
functions are not available after the cleaning
is completed until temperature in the oven
decreases.

Cleaning the water tank

Warning! Do not put water into
the water tank during the
cleaning procedure.
28
.
Description
For a light
cleaning: 1 h.
For a standard
cleaning: 1 h
30 min.
For a thorough
cleaning: 2 h
30 min.