Checking The Battery Status; Charging Mobile Devices With The Power Bank - Silvercrest SPBP 4 A1 Bedienungs- Und Sicherheitshinweise

Checking the battery status

You can check the battery status on the LED indicator
anytime.
Lightly press the ON / OFF switch
shows the current battery status of the power bank
approx. 30 seconds in terms of 4 LED indicators
show overall power bank
1 LED light up = 25 %
2 LEDs light up = 50 %
3 LEDs light up = 75 %
4 LEDs light up = 100 %
This is approx percentage of power bank capacity but
not actual measurement.
Charging mobile devices
with the power bank
Use provided USB type A to USB type C cable
charging cable purchased from reliable supplier. Connect
USB Type A port to USB output
And then connect USB type A to USB type C cable
to the USB-C port to device to be charged. The charging
process will start automatically.
In case if the charging process does not begin immedi-
ately, press the ON / OFF switch
charging process. The current battery status of the power
bank is shown during the charging process by the
6
LED indicator
To end the charging process, separate the USB charging
cable from the mobile device and the power bank
The LED indicator
30 seconds.
28 GB/IE
6
.
5
will switch off after approx.
5
. The LED indicator
1
capacity.
of the power bank
4
shortly to begin the
1
5
5
for
6
to
5
or other
7
.
6
7
.
6