Checking The Battery Status; Charging Mobile Devices With The Power Bank - Silvercrest SPPD 20000 A1 Bedienungs- Und Sicherheitshinweise

* This is approx percentage of power bank capacity but not
actual measurement.
WARNING! Do not connect any device to be charged
to power bank as long as the power bank is charging. Remove
the charging cable from the power bank when it is fully
charged.

Checking the battery status

You can check the battery status via the LED indicator
the power bank
Briefly press the ON / OFF button
9 shows the approximate charge status of the internal
battery capacity level for approx. 30 seconds.
Charging mobile devices with the
power bank
You can charge up to three devices at the same time using the
power bank
sum of the output current may not exceed 3 A.
Connect the USB cable
of the device to be charged to one of the three USB
outputs: USB type C output
or USB type A output 2
Then connect the USB-C plug of the USB cable
USB-C input of the device to be charged. The charging
process will start automatically.
If your mobile device has a USB type C input, you can
use a type C to type C connection cable (not included)
at anytime.
6
. If all outputs are used at the same time, the
6
5
7 or the original charging cable
2 , USB type A output 1
4 .
. The LED indicator
7 to the
GB/MT 51
9 of
1 ,