Checking The Charge Level; Charging External Devices - Silvercrest SPBT 6.000 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SPBT 6.000 A1
mains adapter. During the charging process, the display (4)
gives you information about the percentage charge level of the
Power Bank. The percentage shown on the display (4) flashes
during the charging process.
Alternatively you can also use the USB mains
adapter of your mobile device to charge the battery
of the Power Bank, provided its output meets the
following values: 5V

Checking the charge level

You can check the charge level of the Power Bank when it is
not being charged or discharged. To do this, briefly press the
Charge level/START button (1). The display (4) gives you
information about the charge level of the Power Bank for
approximately 30 seconds. The percentage shown on the
display (4) is lit up.
Please note that the LED display gives only an approximate
value of the actual charge level of the Power Bank.

Charging external devices

 To charge an external device with the Power Bank, connect
the Power Bank with the external device using the supplied
USB charging cable (B). To do this, plug the Micro-USB
connector of the USB charging cable (B) into the Micro-USB
socket of the external device, and plug the USB connector
30- English
, at least 2.0A.