Switching The Unit Off; Servicing - Hama KHL38 Original Bedienungsanleitung

Servicing

Cold lamination
HINWEIS
► If the item to be laminated has not passed through all 4 rollers
approx. 15 seconds after the film pouch was inserted into the
device, the reverse function is automatically switched on and the
item is returned at the front of the device.
Press lever
again for any reason.

Switching the unit off

Press button
Servicing
The rollers in the laminating device need to be cleared of dirt and any
adhesive residue regularly. To do so, proceed as follows:
Switch the device on as previously described.
When the LED next to 75 μ stays lit, insert the cleaning paper
into the device.
If a lot of dirt sticks to the paper turn it over and repeat the proc-
ess again.
KHL 38
4
downwards if you wish to run the item through
8
. The currently illuminated LED goes out.
g
33