g
Cold lamination
HINWEIS
►
If the item to be laminated has not passed through all 4 rollers
approx. 15 seconds after the film pouch was inserted into the
device, the reverse function is automatically switched on and the
item is returned at the front of the device.
Press button
Switching the unit off
Press button
Servicing
The rollers in the laminating device need to be cleared of dirt and any
adhesive residue regularly. To do so, proceed as follows:
Switch the device on as previously described.
When the ready indicator
ing paper into the device.
If a lot of dirt sticks to the paper turn it over and repeat the proc-
ess again.
32
Handling and operation
7
if you wish to run the item through again.
8
. The ready indicator switches off.
4
flashes constantly, insert the clean-
KHL 47