AEG HC652600EB Benutzerinformation Seite 27

Touch the control bar at the heat set-
ting. Change to the left or the right, if it
is necessary. Do not release before you
have a correct heat setting. The display
shows the heat setting.
If you set the temperature, the display
flashes until the roasting zone reaches
the temperature. Then a signal sounds
and the display shows the temperature.
4.4 The Timer
The Count Down Timer.
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
The selection of Timer function is
possible for cooking zones that
are active and the heat setting is
set.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
When this function is activated,
comes on.
• To activate the Count Down Timer:
touch of the timer to set the time (
00 99
- minutes). When the indicator
of the cooking zone starts to flash
slow, the time counts down.
• To see the remaining time: set the
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
• To change the Count Down Tim-
er:set the cooking zone with
touch or .
• To deactivate the Count Down
Time: set the cooking zone with
Touch . The remaining time counts
00
back to . The indicator of the
cooking zone goes out.
When the timer countdown comes to
an end, the sound operates and
flashes. The cooking zone deactivates.
• To deactivate the sound: touch
The Count up timer
Use the Count up timer to monitor how
long the cooking zone operates.
• The selection of the cooking zone (if
• To activate the Count up timer:
• To see how long the cooking zone
• To deactivate the Count up timer:
The Minute minder.
. The indicator
You can use the timer as a minute mind-
er while the cooking zones do not oper-
ate. Touch
Touch
time. When the time comes to an end,
the sound operates and
• To stop the sound: touch
.
4.5 Lock
You can lock the control panel, but not
the heat setting.
00
First set the heat setting.
To start this function touch
bol
The Timer stays on.
more than 1 cooking zone oper-
ates) : touch again and again until
the indicator of a necessary cooking
zone comes on.
When this function is activated,
comes on.
Touch
The symbol goes out and
on.
operates:set the cooking zone with
. The indicator of the cooking
zone starts to flash quickly. The display
shows the time that the zone oper-
ates. The display shows the time of
the cooking zone that operates for
longer period of time.
set the cooking zone with
touch or to deactivate the timer.
the symbol goes out and
on.
When the two Timer functions
operate at the same time, the
display shows the Count Up Tim-
er first.
.
or of the timer to set the
. It prevents an accidental change of
comes on for 4 seconds.
ENGLISH
27
comes
and
comes
00
flashes.
. The sym-