Eurolite Ir-13 Remote Control - EuroLite TL-3 TCL Bedienungsanleitung

EUROLITE IR-13 remote control

1
2
3
Control via IR remote
The Controller has several buttons with following functions:
Brightness up
Red
100% R + 24% G
100% R + 47% G
100% R + 71% G
100% R + 100% G
The device features a memory function. The last program selected will begin anew when the device is
restarted.
When actuating a button, always hold the remote control in the direction of the
sensor. There must be visual connection between the remote control and the
sensor.
The remote control is supplied with a battery inserted. An insulating foil between
the battery and the battery contacts prevents the battery from being discharged
during storage. Prior to the first operation remove the foil from the battery support
on the rear side of the remote control. Otherwise operation of the remote control
is not possible.
If the range of the remote control
meters as a maximum), replace the
purpose, on the rear side of the
press the small bar with the groove
the same time remove the battery support. For operation, one 3 V button cell
type CR2032 is required. When inserting, pay attention that the positive pole of
the button cell shows upwards in the support.
Brightness down
Green
90% G + 23% B
82% G + 46% B
72% G + 69% B
100% G + 100% B
OFF
Blue
22% R + 87% B
48% R + 75% B
67% R + 62% B
100% R + 100% B
33/40
decreases (10
battery. For this
remote control
to the right and at
ON
White
50% / 100% power
Strobe effect
Color Fading
Color Switching
00125583.DOCX, Version 1.1