Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Introduction
MANUFACTURER:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
WE RECOMMEND:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations..
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety requirements in these operat-
ing instructions and your country's applicable regula-
tions, you should observe the generally recognized
technical rules concerning the operation of identical
constructed machines.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device Description (Fig 1-2)
1.
Handle
2.
Engine brake lever
3.
Transport lever
4.
Lower push bar
5.
Plastic star grip nut
6.
Grass basket
7.
Discharge flap
8.
Belt cover
9.
Wheels
10. Oil dipstick
11. working height adjustment
12. Fuel tank with cover
13. Air filter cover
14. Starter cable
15. Throttle Lever
3. Scope of delivery
(Pos. 1-14, A-H)
A
cable clips (2x)
B
starter cable holder (1x)
C
Spark plug wrench (1x)
D
Locknut
E
M8x30 hexagon screw
F
M8x45 hexagon screw
G
Washer
H
Aerator roller
I
Knife roller
Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, store the packaging until the warranty
period has expired.
m ATTENTION!
The device and packaging materials are not
toys! Children must not be allowed to play with
plastic bags, film and small parts! There is a risk
of swallowing and suffocation!
4. Intended use
The equipment can be used as a scarifier.
The scarifying roller is designed for ripping moss
and weeds - complete with their roots - out of the
soil and for loosening the soil. As a result your lawn
can absorb nutrients better and is cleaned. We rec-
ommend you to scarify your lawn in the spring (April)
and autumn (October).
GB
19
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
