Introduction; Device Description (Fig. 1-1A); Scope Of Delivery (Fig. 1-1A); Proper Use - Scheppach 5911412917 Originalbetriebsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you familiarise
yourself with your power tool and teach you how to use
it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the power tool in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The power tool may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associat-
ed hazards. The required minimum age must be ob-
served.
28 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1-1a)

1. Switch lock
2. Gearshift lever
3. Wing nut
4. Upper push bar
5. Lower push rod
6. Wing screw
7. Cutting height adjustment
8. Rechargeable battery cover
9. Front wheel
10. Rear wheel
11. Discharge flap
12. Grass collection basket
13. Rechargeable battery pack
14. Battery charger

3. Scope of delivery (Fig. 1-1a)

a 2 x Round-headed screws M5
b 2 x Washer
c 1 x Clip
d 2 x Handle for grass collection basket
e 1 x Screw ø 4 x 15
f 1 x Safety key
2 x Lower push bars (5)
2 x Wing nut (3)
2 x Wing screw (6)
1 x Grass collection basket (12)
2 x Rechargeable battery pack (13)
1 x Charging unit (14)

4. Proper use

The machine complies with the applicable EC machin-
ery directive.
Before starting any work, all protective and safety de-
vices must be in place.
• The operator is responsible for third parties in the
area of operations.
• The machine has been designed to be operated by
one person.
www.scheppach.com