Setting Up And Connecting; Energy-Efficient Cooking - Silvercrest SDK 2500 A1 Bedienungsanleitung

CAUTION - RISK OF FIRE!
Never leave the appliance unattended while it is being used.
►
When the appliance is in use ensure that there are no easily inflammable
►
GB
materials close to it (e.g. dishcloths, oven cloths etc.).
If you do not intend to use the appliance for an extended period, you must
►
disconnect it from the power source. The appliance is only completely with-
out current when the power plug has been pulled out of the socket.

Setting up and connecting

Energy-efficient cooking
16
1) Place the appliance on a stable, level and heat-resistant surface.
2) Insert the plug into a mains power socket.
3) Switch the appliance on by switching the On/Off switch
4) Switch both hobs
utes without a saucepan.
This can cause slight smoke development since the protective coating which has
been applied will burn in. Ensure there is sufficient ventilation. For example, open
a window.
5) Switch off the hobs
■ Use cooking pots with the same diameter as the respective hob
particularly small pots that do not cover the whole hob
energy is simply wasted.
■ Ensure that the pots/pans rest flat on the hobs
prevent optimum heat conduction.
■ To save energy, you can turn off the hob
finished cooking. The residual heat of the hob
cooking the food.
/ to MAX and allow these to heat up for around 3 min-
/ after 3 minutes.
/
to the position "I".
/ . If you use
/ , a great deal of
/ . Dented or uneven bottoms
before you have completely
/ is usually sufficient to finish
SDK 2500 A1