Setting Up And Connecting; Energy-Efficient Cooking - Silvercrest SDK 2500 A1 Bedienungsanleitung

CAUTION - RISK OF FIRE!
Never leave the appliance unattended while it is being used.
►
When the appliance is in use ensure that there are no easily inflammable
►
materials close to it (e.g. dishcloths, oven cloths etc.).
If you do not intend to use the appliance for an extended period, you
►
must disconnect it from the power source. The appliance is only com-
pletely without current when the power plug has been pulled out of
the socket.

Setting up and connecting

1) Place the appliance on a stable, level and heat-resistant surface.
2) Insert the plug into a mains power socket.
3) Switch the appliance on by switching the On/Off switch
4) Set the two thermostats
about 3 minutes without any pan on them.
This can cause slight smoke development since the protective coating which has
been applied will burn in. Ensure there is sufficient ventilation. For example, open
a window.
5) Switch off the hobs
Energy-efficient cooking
■ Use cooking pots with the same diameter as the respective hob
particularly small pots that do not cover the whole hob
energy is simply wasted.
■ Ensure that the pots/pans rest flat on the hobs
prevent optimum heat conduction.
■ To save energy, you can turn off the hob
finished cooking. The residual heat of the hob
cooking the food.
│ GB │ MT
■ 26
/ to MAX and allow the hobs
/ after 3 minutes.
/
to the position "I".
/ to heat up for
/ . If you use
/ , a great deal of
/ . Dented or uneven bottoms
before you have completely
/ is usually sufficient to finish
SDK 2500 A1