Conrad Electronic WS888 Bedienungsanleitung Seite 74

3. Latch the pedestal into the latch lug of the glass base and
place it on the two screw domes.
4. Screw the pedestal to the glass base using the supplied
wrench and two hexagon socket screws.
The lighting cable of the glass base must be laid as shown in
the picture so that it is not jammed.
5. Place the weather station at the latch lugs of the pedestal and
sway slightly until the screw domes fit neatly in the corre-
sponding receptacles at the weather station.
Caution! Release the console only after you have screwed in
the two hexagon socket screws (see next step)!
Do not press on the display when you hold the console. Hold
it by the frame only!
74
3
4
5