Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
x2
11
12
S8
14
Step 2: Install handlebar and display backrest
NOTE: Please attach the measuring post (7) first and then the handlebar (10).
Please connect the measurement cable before attaching the handlebar (10) and the
back of the meter.
Make sure that the cable plugs (A) and (B) of the measuring device do not fall into the tube.
Align the clips on the cable plugs (A) and (B) and make sure that the plugs are locked.
Be careful not to kink or damage the clamp connection and cables.
Fasten the measuring post (7) with the corresponding screws (107).
Then fasten the handlebar (10) with the corresponding washers (11), spring washers (12) and screws
(11).
Make sure that the direction of the handlebar (10) is correct.
48
x2
107
S5
10
7
A
b
a
Detail A
35
Werbung
Inhaltsverzeichnis
