Assembly - AsViva S8 Pro Benutzerhandbuch

ASSEMBLY

Step 1
Lock the Front Stabilizer (11) to the Main Frame (21) with two sets of Ø8 Flat Washer (5), M8 Domed
Nut (6) and M8*62 Carriage Bolt (3).
Lock the Rear Stabilizer (4) to the Main Frame (21) with two sets of Ø8 Flat Washer (5), M8 Domed
Nut (6) and M8*62 Carriage Bolt (3).
Step 2
Lock the Kettle Holder(pt.65) to the Main Frame (pt.21) with two sets of Flat Washer (pt.66) and Screw
FIG.2
(pt.47).
Put the Kettle(pt.64) into the Kettle Holder(pt.65).
Finally,the Seat (pt.18) fixed on the Seat Post as shown, and lock the nuts under the seat.
35