Requirements For The Chimney - TermaTech TT30G Montage- Und Bedienungsanleitung

TT30 + TT30S Distances to flammable materials using INSULATED fluepipes*
100 mm behind the stove to flammable material
250 mm beside the stove to flammable material
350 mm beside - in front of the stove (+350mm)
250 mm behind/beside if mounted 45° in a corner
1050 mm in front of the stove to flammable material
Picture 3
TT30G+TT30GS+TT30G Classic Distances to flammable materials using UNINSULATED
fluepipes*
150 mm behind the stove to flammable material.
490 mm beside the stove to flammable material.
490 mm behind/beside if mounted 45° in a corner
1050 mm in front of the stove to flammable material.
Picture 5
TT30G+TT30GS+TT30G Classic Distances to flammable materials using INSULATED
fluepipes*
100 mm behind the stove to flammable material.
490 mm beside the stove to flammable material.
490 mm behind/beside if mounted 45° in a corner
1050 mm in front of the stove to flammable material.
Picture 7
It is recommended that there is a minimum of 80-100 mm behind and beside the stove so the
stove can dispose of the heat, this distance makes cleaning of and around the stove easier. In ad-
dition, refer to the relevant Building Regulations.

Requirements for the chimney:

The chimney must be of sufficient height so the draught conditions are okay the smoke does
not bother anyone. Good draught in the chimney is crucial to the stove working as intended and
burns as environmentally friendly as possible. The height of the chimney must typically be a mini-
mum of 3.5 m from the top of the stove to the top of the chimney.
24
(picture 4)
(picture 4)
(picture 4)
(picture 3)
Picture 4
(picture 6)
(picture 6)
(picture 5)
Picture 6
(picture 8)
(picture 8)
(picture 7)
Picture 8