Installing Ringlight Illuminator (Os-Sz3 / Os-Sz6) - Optika OPTIStar OS-SZ1 Bedienungsanleitung

7.4

Installing Ringlight illuminator (OS-SZ3 / OS-SZ6)

1. Screw the fixing ring ① on the bottom of the Stereo head.
(Fig. 23)
2. Place the illuminator on the fixing ring, using the three lock-
ing screws ②. (Fig. 24)
3. Connect the power supply jack to the connector on the illu-
minator. (Fig. 25)
4. Connect the power supply to the wall socket.
①
②
Page 12
F ig. 23 F ig. 23
②
F ig. 24 F ig. 24
F ig. 25 F ig. 25