Use Of Overhanging Stand; Os-Sz3 / Os-Sz4 - Optika OPTIStar OS-SZ1 Bedienungsanleitung

8.9

Use of overhanging stand

8.9.1

OS-SZ3 / OS-SZ4

Moving the horizontal arm
1. Unlock the knob on the right side of the horizontal arm ①.
(Fig. 35)
2. The arm can be extended or shortened according to specific
needs. (Fig. 36)
Swivel the head
1. Unlock the fixing knob ② and rotate the head to the desired
swivel angle (left or right), then tighten the knob again. (Fig.
37)
Rotating the horizontal arm
1. Loosen the horizontal arm fixing knob ③ and rotate the arm,
then tighten again the fixing knob. (Fig. 38)
• NOTE: 180° rotation of the microscope with respect to
the base could cause a rollover of the entire system.
Page 16
①
F ig. 35 F ig. 35
F ig. 36 F ig. 36
②
F ig. 37 F ig. 37
③
F ig. 38 F ig. 38