8.10 Use Of Ringlight Illuminator - Optika OPTIStar OS-SZ1 Bedienungsanleitung

Rotating the horizontal arm
1. Loosen the horizontal arm fixing knob ④ and rotate the arm,
then tighten again the knob. (Fig. 44)
• NOTE: 180° rotation of the microscope with respect to
the base could cause a rollover of the entire system.

8.10 Use of Ringlight Illuminator

1. Use ON/OFF switch ① to turn the LEDs on. (Fig. 45)
2. Use the knob ② to adjust the light intensity.
Page 18
①
F ig. 43 F ig. 43
④
F ig. 44 F ig. 44
②
F ig. 45 F ig. 45