Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Check if the stem is flush with the
bottom of the connecting element.
(Fig. 10).
4. Screw the union bush (left-hand
thread!) into the protective housing
and tighten it. (Fig. 11).
Note:
The use of a pin wrench is
recommended. (00 23 90).
5. Reposition the union end and tighten
the union nuts on both sides with an
adequate wrench. (Fig. 12).
6. Mount the hand lever onto the
connecting element. (Fig. 13).
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
22/27
Werbung
Kapitel
Inhaltsverzeichnis
