User Menu Customisation - IKEA FÖRDELAKTIG AA-2296800-1 Bedienungsanleitung

ENGLISH

User menu customisation

Before carrying out the procedure, it is advisable to read the entire paragraph.
– Press .
– Press and hold again for 3 seconds.
– The key starts flashing.
– Press and hold
– Hold and start pressing the digit of the cooking areas in clockwise order starting from the left front one.
The rear left digit alternately indicates
The front left digit indicates a number which depends on the parameters indicated in the selection.
– Press the left rear digit.
– Select a number on the power bar to access the menu code.
– Press the left front digit.
– Select a number on the power bar to select a value.
See the following table for the specifications:
Menu
Description
code
U2
Key sound volume control menu.
U3
Countdown beeper volume control menu.
U4
Display brightness level control menu.
U5
Countdown display control menu.
U6
Pan detection menu.
U7
Countdown end management menu.
– Once the correct value has been entered, confirm by touching and holding
– To exit the menu without saving, press
If no operation is carried out the user menu will close after 1 minute.
: the digits in the cooking area indicate .
2
1
and a number from 2 to 7 indicating the menu code.
.
3
4
Value
0 - Sound disabled
1 - Min.
3 - Max.
0 - Sound disabled
1 - Min.
3 - Max.
0 - Max.
9 - Min.
0 - Countdown display disabled
1 - Countdown display enabled
0 - Disabled
1 - Enabled
0 - Continuous flashing and shut-down
1 - Ten flashes and shut-down
2 - One flash and shut-down
for 2 seconds.
23