Hartan BUGGY ix1 Bedienungsanleitung Seite 16

All manuals and user guides at all-guides.com
Instructions for use
WARNING! When folding and unfolding the stroller there is a risk of injuries
due to jamming. Take care that you keep your child's body parts at a safe
distance.
Opening the stroller
Place the carriage in the upright position. Then, push the transportation lock
lever 1 up and lift up the carriage, which starts to open.
Kick the central piece of the footboard down to its stop. Then, push down on
the seat bottom to engage the two handle bar catches 2. WARNING! Before
using the stroller, make sure that all locks are engaged..
Mounting the wheel blocks
Slide the front wheel blocks 9 onto the bearing pins and have them engage
audibly by a „click". Slide the rear wheels onto the tube ends and have them
engage audibly by a „click". The red twist grips 7 should point inward.
Folding the stroller
1. Lock the swivelling movement of the wheels by means of lever 8.
2. Lift up the backrest from
the reclining position if
necessary.
3. Pull the hood fabric
tensioner 16 upward to
fold the hood back.
4. Pull the release rings 3
on both sides upwards
until the locking mecha-
nisms 2 are released.
5. Then, pull the handle 20
firmly upwards until the
carriage has folded com-
pletely, and until the
carriage is held together
by the transport securing
device 1.
The carriage now stands
upright without support.
Height-adjustable handles
Depress the red push button 4 to adjust the handle bar height. Depress the
red button 5 to turn the grip inward; thus the stroller can be pushed using one
hand only.
12
19
20