User Maintenance - VATECH EzRay Air W Bedienungsanleitung

5.

User Maintenance

To ensure that the equipment operates at maximum efficiency, it is recommended to
perform the following procedures for the customer's routine maintenance activities.
Maintenance Task Checklist
Sterilize all components that come into contact with the patient
and operator by using an alcohol-based solution.
Wipe the outer covers of the equipment with a dry cloth at the
end of each day's operation.
Ensure that the main power button has been turned off after
using the equipment.
Ensure the audible signal is audible and the X-ray exposure
light is visible when you perform an exposure.
Ensure that the wall framework is securely attached to the wall.
Ensure that the yellow (exposure) indicator light turns on when
the exposure button is pressed.
Ensure that the power cable does not have cuts or abrasions.
Ensure that all cable connectors are not mechanically
defective.
Ensure that the control panel has no defects.
Ensure that the power cable does not have cuts or abrasions.
Ensure that all visible labels are intact and legible.
EzRay Air W (Model: VEX-S300W) User Manual
Always turn off the equipment before performing any maintenance.
Tasks
DO NOT use detergents or solvents to clean the outer covers of the
equipment.
If any defects are found, do not operate the equipment since it has to
be handled by a qualified person. Contact your Service
Representative.
5. User Maintenance
Period
Daily
Daily
Daily
Daily
Daily
Daily
Monthly
Monthly
Monthly
Monthly
Monthly
37