VATECH EzRay Air W Bedienungsanleitung Seite 41

3. While X-ray is being exposed, the X-ray Exposure Indicators on the Control Panel
and the Remote Exposure Switch are turned on and an audible sound is produced.
Keep pressing until the X-ray Exposure Indicator lights are turned off and the audible
sound stops.
Location of
the X-ray Exposure
Indicator
Control Panel
Remote Exposure
EzRay Air W (Model: VEX-S300W) User Manual
X-ray Exposure Indicator's Status
Green: Ready
Switch
The Remote Exposure Switch is detachable. Ensure that the
Remote Exposure Switch cable is not detached out from the unit
accidentally during the operation.
Keep vocal/visual contact with the patient during exposure. If any
problem occurs during exposure, release the Remote Exposure
Switch immediately.
If the Door Interlock Switch (option) has been installed, X-ray
exposure will be stopped once the door of the X-ray room is opened.
As described in step 2 and 3 above, the X-ray Exposure Indicator is
included both on the Control Panel and the Remote Exposure
Switch.
3. Operation
Yellow: X-ray ON
31