Philips AVENT SCD535 Benutzerhandbuch Seite 9

• After 2 seconds the message 'Linked'
disappears and the temperature and
humidity values are shown on the
display. (Fig. 18)
• The first time you switch on the parent
unit, the message 'Language' appears on
the display. Select the desired language
(see chapter 'Menu options, section 'Setting
display language') (Fig. 19).
• If no connection is established, the LINK
light on the parent unit flashes red. The
parent unit beeps from time to time
and the message 'Searching' appears on
the display, followed by the message 'Not
Linked' (Fig. 20).
5.1 Positioning the baby
monitor
Place the baby unit at least 1 metre/3 feet
1
away from your baby (Fig. 21).
Place the parent unit within the operating
2
range of the baby unit. Make sure it is at least
1 metre/3 feet away from the baby unit to
avoid acoustic feedback (Fig. 10).
For more information on the operating range, For more information on the operating range, For more information on the operating range,
see section 'Operating range' below.
5.1.1 Operating range
The operating range of the baby monitor is 330 The operating range of the baby monitor is 330 The operating range of the baby monitor is 330
metres/1000 feet in open air. Depending on the metres/1000 feet in open air. Depending on the metres/1000 feet in open air. Depending on the
surroundings and other factors that may cause surroundings and other factors that may cause surroundings and other factors that may cause
interference, this range may be smaller. Indoors interference, this range may be smaller. Indoors interference, this range may be smaller. Indoors
the operating range is up to 50 metres/150 feet. the operating range is up to 50 metres/150 feet. the operating range is up to 50 metres/150 feet.
Note:
D
If the ECO mode is switched on, the operating
range of the baby monitor is also smaller. See
section 'ECO mode' in chapter 'Menu options'.
Dry materials
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
Brick, plywood
Reinforced concrete
All manuals and user guides at all-guides.com
Material Loss of
thickness range
< 30cm/12in 0-10%
< 30cm/12in 5-35%
< 30cm/12in 30-100%
Dry materials
Metal grilles or bars
Metal or aluminium
sheets
For wet and moist materials, the range loss may
be up to 100%.
6 Features
The following features are described in chapter
'Menu options', as they can only be operated in 'Menu options', as they can only be operated in 'Menu options', as they can only be operated in
the menu of the parent unit: the menu of the parent unit: the menu of the parent unit:
•
Adjusting microphone sensitivity Adjusting microphone sensitivity Adjusting microphone sensitivity
•
Sound alert on/off Sound aler Sound alert on/off t on/off
•
Setting room temper Setting room temper Setting room temperature range (minimum
and maximum temperature) and maximum temperature) and maximum temperature)
•
Temperature alert on/off Temperature alert on/off T T emperature alert on/off T T T emperature alert on/off emperature alert on/off
•
Vibration alert on/off Vibration alert on/off Vibr ation alert on/off
• • • ECO mode on/off ECO mode on/off ECO mode on/off
• • •
Setting temperature scale (Fahrenheit or
Celcius)
6.1 Adjusting loudspeaker
volume
Press the volume + or – button on the baby
1
unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 22).
Press the volume + or – button on the parent
2
unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 23).
• The displays give visual feedback on the
volume settings of the units: (Fig. 24)
1 minimum volume (parent unit and
baby unit)
2 maximum volume (parent unit and
baby unit)
Note:
D
If the volume is set to the lowest level, the
display shows 'OFF'.
Material Loss of
thickness range
< 1cm /0.4in 90-100%
< 1cm/0.4in 100%
9