Philips AVENT SCD535 Benutzerhandbuch Seite 12

7.2 ECO mode
Note:
D
You can only switch the ECO mode on and off
in the menu of the parent unit.
You can use the ECO mode to reduce the energy
consumption of the appliance. Monitoring your
baby from a small distance requires less
transmission power and less electrical power
than monitoring your baby from a large distance.
When you monitor your baby from a small
distance, you can activate the ECO mode.
In the ECO mode, the appliance consumes
less energy, but still ensures that you can always
hear your baby clearly without any distracting
noise. Using the baby monitor in the ECO mode
helps you to preserve the environment.
Note:
D
The operating range of the baby monitor when
it is operated in the ECO mode is 260 meters
in open air. Depending on the surroundings and
other factor that may cause interference, this
range may be smaller.
Select 'ECO mode' with the + and -
1
buttons (Fig. 31).
Press the OK button to confirm (Fig. 32).
2
If the ECO mode is off, the display shows
3
'On?'. Press the OK button to switch on 'On?'. Press the OK button to switch on 'On?'. Press the OK button to switch on
the ECO mode. If the ECO mode is on, the the ECO mode. If the ECO mode is on, the the ECO mode. If the ECO mode is on, the
display shows 'Off?'. Press the OK button to display shows 'Off?'. Press the OK button to display shows 'Off?'. Press the OK button to
switch off the ECO mode. switch off the ECO mode. switch off the ECO mode.
• If you have set the If you have set the If you have set the ECO mode to 'on', the
parent unit switches off and on again. The
ECO mode symbol appears on the display of
the baby unit and the parent unit to indicate
that both units now operate in ECO mode.
Note:
D
The connection between parent and baby
unit may be lost when the ECO mode is
switched on. If this happens, the operating
range may be too large for the ECO mode. In
this case, either reduce the operating range or
switch off the ECO mode.
12
All manuals and user guides at all-guides.com
(Fig. (Fig. 32). 32).
the display shows the display shows
ECO mode to 'on', the ECO mode to 'on', the
7.3 Nightlight on/off
Select 'Light' with the + and - buttons.
1
Press the OK button to confirm.
2
If the nightlight is off, the display shows
3
'On?'. Press the OK button to switch on the
nightlight. If the nightlight is on, the display
shows 'Off?'. Press the OK button to switch off
the nightlight.
7.4 Lullaby function
7.4.1 Selecting a lullaby
Select 'Lullaby' with the + and - buttons.
1
Press the OK button to confirm.
2
Press the + button once or several times to + button once or several times to + button once or several times to
3
select one of the five lullabies from the list or select one of the five lullabies from the list or select one of the five lullabies from the list or
to select 'Play All'. to select 'Play All'. to select 'Play All'.
Press the OK b Press the OK button to confirm. Press the OK button to confirm. utton to confirm.
4
When you have selected one of the five When you have selected one of the five When you have selected one of the five
lullabies, it is played 5 times in a row. lullabies, it is played lullabies, it is played
When you select 'play all', all 5 lullabies are When you select 'play all', all 5 lullabies are When you select 'play all', all 5 lullabies are
played once. played once. played once.
7.4.2 7.4.2 Switching to another lullaby 7.4.2
Press the + button to choose another lullaby
1
from the list.
Press the OK button to confirm.
2
7.4.3 Pausing a lullaby
Press the OK button.
1
• The message 'Paused' appears on the
display.
Press the OK button again to resume the
2
lullaby.
If you do not resume the lullaby within 30
seconds, the lullaby function switches off
automatically. The message 'Paused' and the
lullaby symbol disappear from the display.
7.4.4 Stopping a lullaby
Press the + button to select 'Stop' from the
1
list.
Press the OK button to confirm.
2