Husqvarna TE 450/2005 Handbuch Seite 168

Lavaggio catena senza anelli OR
Lavaggio catena con anelli OR
Lubrificazione catena senza anelli OR
Lubrificazione catena con anelli OR
2 - Check that the chain is neither worn out nor
damaged. If the rollers or the links are
damaged, replace the chain by following the
instructions given in the Periodical
Maintenance Table.
3 -Check that neither the sprocket nor the
crown are damaged.
4 -Wash and clean the chain as described
hereunder.
Washing the chain without OR
Wash using either oil or diesel oil. When using
gasoline or tricloroetilene, clean and lubricate
the chain to prevent oxidation.
Washing the chain with OR
Wash using oil, diesel oil, or paraffin oil. Never
use gasoline, tricloroetilene, or solvents, as the
OR may suffer damages.
Use instead special sprays for chains with OR.
Lubricating the chain without OR
First dry, then plunge the chain in a bisulphide
molybdenum lubricant, or in high viscosity
engine oil. Warm up the oil before use.
Lubricating the chain with OR
Lubricate all metallic and rubber (OR)
elements using a brush, and use engine oil
with SAE 80-90 viscosity for the internal and
external parts.
5 - If the chain has been cut, reassemble
using a joint.
6 -Assemble the joint spring by turning the
closed side to the chain direction of rotation as
shown in figure (page 155).
Lavage de la chaîne sans bagues d'étanchéité
Lavage de la chaîne avec bagues d'étanchéité
Graissage de la chaîne sans bagues d'étanchéité
Graissage de la chaîne avec bagues d'étanchéité